Pultrusion machine · Integrated mesh configuration
GFRP rebar mesh production line
Henan Zhongsheng lists integrated equipment for continuous composite mesh production. Grid geometry, junction formation and panel handling belong in the project specification. Its published output example applies to 2.5 mm bars only; a different diameter or grid requires a separate production assessment.
Download product & RFQ brief (.txt)Configuration brief
Start with the product you need to make.
Define the junction
Specify how intersections will be assessed. A correct aperture alone does not establish mesh performance.
Qualify the output figure
Request trial output for your own diameter, width and grid. Record rejects and stoppages as well as gross area.
Review the configuration with engineering before the quotation is finalized.
Choose the configuration
What to resolve before selecting this line
Define the junction
Specify how intersections will be assessed. A correct aperture alone does not establish mesh performance.
Qualify the output figure
Request trial output for your own diameter, width and grid. Record rejects and stoppages as well as gross area.
Specification
Configuration table
Published catalogue values are reference figures; the agreed configuration and acceptance criteria belong in the quotation. Unconfirmed values are marked TBD · ask factory.
| Parameter | Integrated mesh configuration |
|---|---|
| Published grid aperture range | 50 × 50–300 × 300 mm |
| Published output exampleFor 2.5 mm bars only; not a general output guarantee | Up to 150 m²/h |
| Supported bar diameter range | TBD · ask factory |
| Output for the requested mesh | TBD · ask factory |
| Maximum mesh width | TBD · ask factory |
| Total connected power | TBD · ask factory |
| Overall line dimensions | TBD · ask factory |
| Supply voltage / frequency | TBD · ask factory |
| Lead time (working days) | TBD · ask factory |
Reference: Henan Zhongsheng — gfrp rebar mesh production line. Henan Zhongsheng manufacturer catalogue, checked 2026-10-21. Published data requires confirmation in the project specification. Reviewed .
Production workflow
Review the line, stage by stage
Use these stages to define responsibilities, interfaces and the evidence needed at handover.
- 01
Prepare reinforcement
Agree the feed and impregnation arrangement for the grid design.
- 02
Form and cure intersections
Confirm the proposed junction process and how the trial will demonstrate it.
- 03
Advance and size panels
Define traction, cutting and finished-mesh support.
- 04
Inspect the mesh
Record grid dimensions and retain identified junction samples.
Scope of supply
Define the supply package and its options
Request an itemized quotation against these lists. A catalogue description does not confirm that every item is included.
Core equipment and work to specify
- Scope to agree: fiber feed and impregnation
- Grid-forming and curing arrangement
- Traction, cutting and control interfaces
- FAT mesh design and documented sampling plan
Options and services to price separately
- Tooling for additional grid designs
- Panel stacking, coiling or packaging equipment
- Destination electrical design and plant utilities
- Commissioning, training, spare parts and transport
Applications
Applications to discuss with engineering
- Composite mesh manufacturing projects
- Grid production trials for a specified reinforcement design
Prepare your enquiry
Send a brief that can be quoted
Include the drawings and requirements below so engineering can confirm the configuration, exclusions and lead time.
Include in your RFQ
- Mesh drawing with aperture, bar diameter and panel width
- Intersection requirements and test method
- Resin and reinforcement specification
- Required accepted area per shift for each design
- Panel lengths, storage and packing format
- Utility supply and available floor plan
Agree the acceptance evidence
- Measure aperture, panel size and squareness against agreed limits
- Inspect and test identified intersection samples
- Record accepted area and rejects for the specified mesh
- Demonstrate cutting and discharge without unacceptable grid damage
Commercial terms
Who you contract with
- Manufacturer
- Henan Zhongsheng Composite Material Co., Ltd.
- Warranty party and term
- Henan Zhongsheng Composite Material Co., Ltd.; term and coverage confirmed in the written quotation.
- Contracting party and exporter of record
- pultrx, Shanghai, China
- Incoterms
- FOB Chinese port by default; CIF/DAP on request
- Payment
- Agree milestones for drawing approval, contracted trial or FAT acceptance and shipment. Exact split on the quotation.
- Third-party inspection
- SGS, BV or TÜV pre-shipment inspection accepted, cost borne by the buyer
- Electrical and controls
- State the plant voltage and frequency, including 380 V 50 Hz or 480 V 60 Hz. Agree the panel standard, guarding and destination conformity documentation in the quotation; certification is not implied.
- Lead time and spare parts
- Confirm working days from drawing and specification approval, plus the recommended wear-parts list, unit prices and availability.
FAQ
Questions buyers ask
- Is 150 m²/h available for every mesh?
- No. The manufacturer qualifies that example with 2.5 mm bars. Output for your mesh remains subject to an agreed trial.
- Does the published aperture range define mesh width?
- No. Grid spacing and overall panel width are separate dimensions. Maximum width has not been confirmed here.
- Is this a standard rebar line with a rack?
- The manufacturer lists it as an integrated mesh product. Confirm the actual grid-forming method and equipment boundary in the quotation.
Send a cross-section drawing. Get a scoped quotation.
Every quotation names the manufacturer, the exporter of record and the warranty party, and lists what is included.