Pultrusion machine · Double-station configuration
Double-station hydraulic pultrusion machine
Henan Zhongsheng lists a double-station hydraulic pultrusion machine with independently controlled stations. Use separate profile drawings and process requirements for each path. The published ratings below describe the catalogue configuration; they do not establish achievable output for an untested resin and die.
Download product & RFQ brief (.txt)Configuration brief
Start with the product you need to make.
Treat each path separately
Provide resin, die and product requirements for both stations. Check whether the planned materials can share the same operating area.
Plan the full footprint
The main-machine dimensions exclude the creel. Request a layout including feed, saws, finished-part handling and access.
Review the configuration with engineering before the quotation is finalized.
Choose the configuration
What to resolve before selecting this line
Treat each path separately
Provide resin, die and product requirements for both stations. Check whether the planned materials can share the same operating area.
Plan the full footprint
The main-machine dimensions exclude the creel. Request a layout including feed, saws, finished-part handling and access.
Specification
Configuration table
Published catalogue values are reference figures; the agreed configuration and acceptance criteria belong in the quotation. Unconfirmed values are marked TBD · ask factory.
| Parameter | Double-station configuration |
|---|---|
| Maximum pull force per station | 100 kN |
| Pull speed range | 0.1–1.5 m/min |
| Maximum profile width × height | 200 × 100 mm |
| Clamping clearance | 400 × 200 mm |
| Adjustable die table length | 430–1,030 mm |
| Heating zones | 8 × 2 |
| Main machine dimensionsExcludes creel framework | 11,000 × 1,460 × 2,200 mm |
| Total connected powerPage states 24 kW total but 50 kW heating; request a reconciled load list | TBD · ask factory |
| Supply voltage | 380 V 50 Hz |
| Lead time (working days) | TBD · ask factory |
Reference: Henan Zhongsheng — double-station hydraulic pultrusion machine. Henan Zhongsheng manufacturer catalogue, checked 2026-10-21. Published data requires confirmation in the project specification. Reviewed .
Production workflow
Review the line, stage by stage
Use these stages to define responsibilities, interfaces and the evidence needed at handover.
- 01
Prepare two feeds
Agree the reinforcement and resin arrangement serving each station.
- 02
Set the dies
Review tooling clearance and the heating recipe for each section.
- 03
Coordinate production
Define how each station starts, stops and transfers parts to downstream handling.
Scope of supply
Define the supply package and its options
Request an itemized quotation against these lists. A catalogue description does not confirm that every item is included.
Core equipment and work to specify
- Scope to agree: both pulling stations and controls
- Die supports and heating arrangement for each path
- Cut-off interfaces, guards and documentation
- Trial plan covering both stations
Options and services to price separately
- Dies, gripping inserts and preformers for each profile
- Creels and resin equipment for the proposed layout
- Electrical adaptation, commissioning and training
- Wear spares, packing and freight
Applications
Applications to discuss with engineering
- Concurrent profile production projects
- Product mixes requiring separate station settings
Prepare your enquiry
Send a brief that can be quoted
Include the drawings and requirements below so engineering can confirm the configuration, exclusions and lead time.
Include in your RFQ
- Drawing and material specification for each station
- Required speed and production schedule per profile
- Cut lengths and downstream handling
- Whether stations must stop and change over independently
- Full site layout and available utility capacity
Agree the acceptance evidence
- Run the agreed profiles on both stations during FAT
- Demonstrate independent setting changes and stopping behavior
- Inspect grip marks, dimensions and cut lengths
- Reconcile measured electrical demand with the approved load list
Commercial terms
Who you contract with
- Manufacturer
- Henan Zhongsheng Composite Material Co., Ltd.
- Warranty party and term
- Henan Zhongsheng Composite Material Co., Ltd.; term and coverage confirmed in the written quotation.
- Contracting party and exporter of record
- pultrx, Shanghai, China
- Incoterms
- FOB Chinese port by default; CIF/DAP on request
- Payment
- Agree milestones for drawing approval, contracted trial or FAT acceptance and shipment. Exact split on the quotation.
- Third-party inspection
- SGS, BV or TÜV pre-shipment inspection accepted, cost borne by the buyer
- Electrical and controls
- State the plant voltage and frequency, including 380 V 50 Hz or 480 V 60 Hz. Agree the panel standard, guarding and destination conformity documentation in the quotation; certification is not implied.
- Lead time and spare parts
- Confirm working days from drawing and specification approval, plus the recommended wear-parts list, unit prices and availability.
FAQ
Questions buyers ask
- Does two stations mean twice the output?
- Do not assume that. Compare accepted production for both proposed profiles, including feed preparation, changeover and downstream handling.
- Can different profiles run together?
- The manufacturer describes independent station control. Ask it to demonstrate your specific pairing and confirm any shared utilities or stopping dependencies.
- Why is connected power TBD?
- The published total is lower than the stated heating load. Electrical sizing needs a corrected load list from the manufacturer.
Send a cross-section drawing. Get a scoped quotation.
Every quotation names the manufacturer, the exporter of record and the warranty party, and lists what is included.