pultrx · Window and door systems
FRP windows & doors
Compare 11 finished fiberglass window and door systems for project openings, or review the separate 80, 90 and 140 profile-system references. Define the glass, hardware and assembly scope with pultrx.
Finished units · 8 windows + 3 doors
Choose the complete window or door
Explore casement, flush, tilt-and-turn, micro-vent and facade windows, plus entrance, lift-and-slide and side-pressure doors. Compare glazing configurations and catalog performance, then send your opening schedule.
This 11-family collection is separate from the three section-based systems below. Series numbers identify products; they do not establish matching frame depths or interchangeable components.
Separate profile-system collection
80, 90 and 140 series section references
Frame depth and opening arrangement are a starting point. Confirm dimensions, section drawings and the complete configuration before ordering.
80 mm frame · 80 series
80 Series FRP Tilt-and-Turn Window
An 80 mm frame system for inward-opening and tilt-and-turn windows. Review the frame, mullion and sash sections together before specifying fabrication or finished units.
Specifications and purchase scope90 mm frame · 90 series
90 Series FRP Casement Window
A 90 mm frame system for casement and tilt-and-turn windows. Specify the opening arrangement and glazing build-up against the matching frame, mullion and sash sections.
Specifications and purchase scope140 mm frame · 140 series
140 Series FRP Sliding Door
A 140 mm sliding-door system with side-compression sealing. Define the panel arrangement, threshold interface and hardware package before requesting a project quotation.
Specifications and purchase scope
| System | Frame depth | Opening arrangement | Profile references |
|---|---|---|---|
| 80 series | 80 mm | Inward-opening / tilt-and-turn | GF0501 / GF0502 / GF0503 |
| 90 series | 90 mm | Casement / tilt-and-turn | GF0601 / GF0602 / GF0603 |
| 140 series | 140 mm | Sliding with side-compression sealing | CP006 / CP007 / CP008 / CP009 / CP010 / CP011 |
Two supply routes
Profiles for fabrication or finished units
01 · Fabricators and system teams
Buy the profile set
Specify section codes, lengths, quantity, finish and machining. Agree compatible accessories and define who supplies glazing and hardware, carries out assembly and verifies the finished unit.
02 · Project buyers and dealers
Specify finished windows and doors
Send an opening schedule with sizes, operating direction, glazing, hardware and project requirements. Confirm the assembly package, inspection, packing and installation responsibilities in writing.
Procurement documents
Review the sections before requesting a quote
The pultrx window and door catalog covers these three systems, edition November 3, 2026. Section outlines are reference geometry; request dimensioned drawings for fabrication.
Agree performance for your configuration
Specify the project test requirements and request evidence for the proposed size, glass and hardware. Frame dimensions alone do not establish finished-unit thermal, weather or load performance.
Send the opening schedule or section list.
Tell us whether you need profiles or finished units. We will scope the pultrx enquiry around your drawings, quantities and project requirements.